T-rafter conservatory

  • Gutter

  • Gutter for Roller Shutter

  • Rafters

  • Ridge

  • Articulated adjustable-joint rafter

  • Valley Rafter

  • Structure - Post 7152TH

  • Structure - Post 7054TH

  • Structure - Integration of Windows - Post 7018TH

  • Structure - Integration of Windows - Post 7051TH

  • Structure - Integration of Windows - Post 7119TH

  • Structure - Integration of Windows - Post 7127TH

  • Structure - Integration of Windows - Post 7125TH

  • Slim Structure - Slim Intermediate Post

  • Slim Structure - Integration of Windows

  • References (9)
  • 3D Views (11)
  • Vidéos (1)
  • Sections (15)
  • Features
  • Pluses

Installux Aluminium's traditional Luciole® T-rafter conservatory is composed of a T-rafter roof and a structure integrating the thermal-comfort opening frames of the 50TH and 26TH range.



Installux Aluminium’s Luciole® T-rafter roof is composed of thermal-break rafters in the shape of an inverted T, intermediate and ridge rafters. The infill elements with a maximum thickness of 55 mm are held by gaskets, glazing beads, or cover caps.
The rafters may be reinforced in case of projects of large dimensions or located in regions with heavy snow or wind load.
The gutter is part of the pole plate and is available in two versions, with or without roller shutter box.


The gutter of the Luciole® T-rafter roof system is part of the pole plate. It accepts a high water level and has a high inertia allowing large-size installations.
The look and the finishings of the gutter have been designed with the greatest care. Three models of traditional or modern raisers give it the finishing touch.

Gutter for Roller Shutter

The gutter/pole plate of the Luciole® T-rafter roof system is also available in a version to incorporate a roller shutter box, allowing the conservatory to offer a complete blackout possibility providing absolute safety and solar protection.

Rafter & Ridge

The Luciole® T-rafter roof system is composed of a wide choice of thermal-break rafters. The infill elements with a maximum thickness of 55 mm are held by gaskets, glazing beads, or cover caps.

At the outside the T-rafters have a typical look. Their inside aspect may be modified by the addition of a moulded capping simulating the effect of traditional beams.

Adjustable-Joint Rafters & Valley Rafter

The Luciole® T-rafter roof system proposes two types of adjustable-joint rafters.
The articulated adjustable-joint rafters greatly facilitate the fitting of the glazing elements.
The slim adjustable-joint rafter gives the roof the aspect of a more traditional metallic structure.

Specializing in conservatories, Installux Aluminium has developed a system allowing all the possible shapes.
Thanks to the valley rafter of the Luciole® T-rafter roof system, it is also possible to realize inward sloping corners.




The choice of traditional posts of the Luciole® conservatories offers many technical solutions with variable or fixed angles.The structure of the traditional Luciole® conservatory accepts all the thermal-comfort sliding and hinged windows of the 50 and 26TH ranges.

A choice of large-section frames, specific to the conservatory, ensures the aesthetic consistency of the whole.

Slim Intermediate Posts

This intermediate post with its unique design is made possible by fixing two frames back to back, resulting in the reduction of the aluminium volume.
In order to achieve aesthetic consistency, the same frames may be used for the angle posts.

All the hinged windows of the 50TH thermal-comfort range and all the sliding doors and windows of the Galaxie® 26 TH range, including monorail and trirail, fit neatly into this structure.





+ High-capacity gutter.
+ Continuous concealed drainage.
+ Traditional or modern raisers.
+ Gutter caps without visible screws.
+ High inertia.
+ Choice between two gutters according to the features of the construction.

Gutter for Roller Shutter

+ Side channels and bottom slats be powdercoated in the same colour as the conservatory.
+ Integration of standard roller shutters (up to 2300 x 3000 mm).


+ Infill up to 55 mm.
+ Wide choice of rafters.
+ Inside cap accepting lighting system.
+ Infill elements held by gaskets, glazing beads, or cover caps.

Slim Arris Rafter

+ Minimalistic aspect: more glazing, less aluminium.

Tradition Structure

+ Built-in rainwater pipe.
+ Fixed or variable angle.
+ Specific conservatory frames.
+ Integration of all hinged and sliding windows of the 50 & 26TH ranges.




+ Slope up to 45° (welding possible if required)
+ Easy fabrication: no machining for the drainage of the raisers.

Gutter for Roller Shutter

+ Corner cleat available for neat finish of the gutter angles.
+ Same concept for 50TH/26TH and 70TH/32TH ranges.

Articulated Arris Rafter

+ Infill resting perpendicular.

Slim Intermediate Posts Structure

+ Intermediate posts without junction profiles.