APPLICATION
Hinged or pivoted extruded aluminium door (6060 T5 or 6063 T6 alloy). Thermal break by crimped bars ( K = abt 2.90 W/m2°C). Particularly fit for medium and heavy traffic entrances..

FRAME
50-mm thermal break frame with or without removable architrave. Assembly of miter joints by means of crimping or screwable corner cleats. Various combinations with fixed side frames and/or fixed or opening transom light.
Fixture on shell by means or anchoring or fixing plates.

LEAVES
Single or double, in- or outward opening door. 50-mm thermal break leaf. Peripheral section with miter joint assembly by means of crimping or screwable corner cleats, or junction block assembled kickplate. 22-mm deep fillister for 5- to 34-mm infill.

WEATHERPROOFING
EPDM glazing gaskets. Double peripheral rabbet gasket,double broom gasket under bottom transom.

FINISH
Anodizing : 20-class satin for silver, 15-class for other colours (20- class on order). In accordance with international QUALANOD and EWAA-EURAS standards and French NFA 91450 standard.
80-micron powder coating with QUALICOAT seal.